| |
NetCamCenter 版本歷史
Version 2.80b Date: 5/8/12
- Added support to the following cameras:
- Panasonic
- H264 mode
- HD camera (MJPEG mode)
Version 2.80a Date: 3/2/12
- Added support to the following cameras:
- ONVIF camera
- Toshiba
- IK-WB12A
- IK-WB16A
- IK-WB80A
- Cisco
- WVC210 MJPEG
- WVC210 MPEG4
Version 2.70 Date: 11/16/10
- Added support to the following cameras:
- Arecont Vision H.264 camera
- Sony H.264 camera
- Asoni SVR610 video server
- MOBOTIX
- Sanyo
- VCC-HD3500P
- VCC-HD5400P
- VCC-XZN600P
- Y-cam
- Y-cam Bullet
- Y-cam White
- Y-cam Black
- Y-cam Knight
Version 2.68f Date: 2/24/10
- Added Sanyo VA-82LAN , VCC-HD2500P, VCC-HD4600P ( JPEG mode )
- Added Toshiba IK-WD01A , IK-WB70A
- Added SONY MJPEG mode for SNC network cameras.
- Added "MJPEG push" to "Generic Motion JPEG camera" (for cameras with MJPEG server push).
- Allows you to enter the channel number to select camera stream for Vivotek dual stream cameras.
Version 2.68e Date: 12/18/09
- Recordings of different dates are saved
in a separate folder named YYYYMMDD under the same video path.
- Added support to Cisco CIVS-IPC-2500.
Version 2.68b Date: 10/5/09
- Supported digital watermark to assure the recordings are authentic. File fingerprint has been removed and replaced by digital watermark.
Version 2.68a Date: 9/8/09
- Supported two way audio for Vivotek camera
- Supported Windows 7 Professional (32-bit and 64-bit) editions (not applied to WCSA440en and WCSA400N.)
Version 2.68 Date: 7/20/09
- Generates thumbnail images (Available only on NetCamCenter Professional, WCSA400N and WCSA440en.)
-
Added search thumbnails via IE and Firefox.(Available only on NetCamCenter Professional, WCSA400N and WCSA440en.)
- New Webcam Corp. NVC codec.
- Added support to the following cameras
- Linksys WVC210, WVC54GCA
- Trendnet TV-IP110 / TV-IP110W
- Added Auto detect for 4XEM
- Removed "Save as JPEG file".
Version 2.67 Date: 5/18/09
- 全螢幕及應用模式切換不需重新啟動 NetCamCenter. 全螢幕模式也可修改攝影機設定.
Version 2.65a Date: 1/19/09
- Added support to the following camera:
Axis
Version 2.64a Date: 11/20/08
- Added support to the following camera:
D-Link
- DCS-3420
- DCS-3415
- DCS-6110
Panasonic
- 3.51 firmware for MPEG4 mode (UDP only)
Vivotek
- Auto detect option
- IP7142
- IP7151
- IZ7151
- PZ7151/7152
- SD7151
Version 2.64 Date: 9/11/08
- 新增 NetCamCenter NetViewer 遠端觀看
- P4504 聲音錄音
Version 2.63 Date: 6/18/08
- 支援 JPEG streaming
- 新增下列攝影機:
GANZ
- ZN-PT304L/ZN-PT304WL
- ZN-YH305
- ZV-S306
- ZN-D2024
Vivotek
- FD7131
- Added an option to enable or disable generating MD5 fingerprint
- Added an option to generate JPEG file in htdoc folder
- 提升 Vivotek 連線效能
Version 2.62 Date: 3/18/08
- 支援影像水平翻轉
- 支援 Axis GPIO.
- 可設定保留 x 天影像
- Added area of interest. Drag and select a rectangle on a video window to zoom in.
Version 2.53c Date: 10/16/07
- Several video post processing are now queued to reduce peak system usage.
Version 2.53a Date: 9/19/07
- 修正 Vivotek 及 D-Link 攝影機連線效能
Version 2.53 Date: 8/24/07
- 新增下列攝影機:
LevelOne
- FCS-1010, WCS-2010
- FCS-1040, WCS-2040
- FCS-1070, WCS-2070
Panasonic
- BB-HCM511, BB-HCM531, BB-HCM580, BB-HCM581
- BL-C111, BL-C131
Vivotek
- FD6111V, FD6121V, FD6112V/, FD6122V
- IP7131, IP7132, IP7135, IP7137
- SD6112V, 6122V
- VS3100P
- VS7100
- IP7138, IP7139
- PT7135, PT3137
Version 2.52 Date: 5/23/07
- 增強 video 回放
- 增強 kiosk mode and dual monitor support
Version 2.50a Date: 3/14/07
- Added support to Canon VB-C50Fi
- Added support to Toshiba IK-WB15A, and IK-WB21A
- Added support to search video captured by motion detection
- Updated ActiveX control for remote viewing
Version 2.50 Date: 2/7/07
- Default video and htdoc folder is now under Shared Documents
- Added support to change password for User Manager.
- Webcam Corp NVC2 codec 發行. 錄影檔案附檔名為 .asf
Version 2.44b Date: 11/15/06
- Added support to control Canon PTZ remotely
- Added email notification when connection to the camera is lost
- Updated PTZ control panel
- Webcam Corp WVC1 codec is renamed to NVC1 codec.
- Supported TV-IP301 (JPEG mode only)
Version 2.43 Date: 9/11/06
- 支援 IQinVision IQeye501
- Fixed GPIO alarm actions
Version 2.42 Date: 7/31/06
- 支援動作偵測預錄功能
- 可選擇關閉 Intel CPU 的 JPEG 高速演算
Version 2.40 Date: 5/4/06
- Supported prealarm recording
- Supported the input and output controls to the following devices
D-Link
- DCS-3220, DCS-3220G
- DCS-5300, DCS-5300G, DCS-5300W
- DCS-6620, DCS6620G
Panasonic
- KX-HCM2XX
- KX-HCM311A
- KX-HCM331
Pixord
- P4000
Vivotek
- IP211x, IP212x
- IP311x, IP312x, IP3132, IP3133
- IP61x2, IP61x4
- PT31xx
- PZ61xx
- VS2101,VS2402, VS2403
- VS3102
Version 2.30b Date: 1/27/06
- 增強動作偵測功能,並提供標示畫面變化區域功能
- 支援設定字幕背景顏色
- 新增支援 Pixord 300
Version 2.20 Date: 12/28/05
- Supports uploading images to FTP server by seconds
- Supports the following compression codecs
- Windows Media Video 7
- Windows Media Video 8
- Webcam Corp WVC1
新增支援下列攝影機
- Axis 207/207W/210/211/221 (JPEG mode)
- Axis 210A/211A (JPEG mode)
- Panasonic BB-HCM331, BB-HCM381
Version 2.15 Date: 11/25/05
- 新增支援下列攝影機
- SONY SNC-M1/M1W (JPEG mode)
- SNC-M3/M3W (JPEG mode)
- PTZ cruise / PTZ 巡航
Version 2.14c
- 修正 Canon network 每秒張數
- 修正某些顯示卡執行螢幕保護程式後,video window 畫面變黑
Version 2.14
- Added support to video rendering with DirectX.
- Added support to record audio with the following cameras.
- DCS-6620/DCS-6620G
- IP6112, IP6122, IP6114, IP6124, PZ61xx
- Supported deblocking
This option is available for certain cameras. Deblocking
provides better video quality but consumes more CPU resources.
Version 2.13
- Added support to Axis 210, 211, 211A, 231D, 232D
- Added support to Canon VB-50i, VC-50i, VB-50iR, VC-50iR
- Added support to D-Link DCS-6620, DCS-6620G
- Added support to Vivotek IP6112, IP6122, IP6114, IP6124, PZ61xx
Version 2.12
- Control network PTZ camera through the built-in web server.
- Setup multiple usernames and passwords to control access to specific camera. (NetCamCenter Professional only.)
- Support recording audio and video with the following devices.
- D-Link 5300, D-Link 2100 series
- Vivotek IP 31xx camera
- Vivotek VS31xx video server
- Control network PTZ camera through the built-in web server.
- Enhanced video quality when panning the D-Link 5300 camera.
Version 2.07
- Added support to Axis 241Q, 241S
- Added support to Panasonic BL-C30, KX-HCM3x0
- Enables you to enter compression rate manually
- Enables you to setup display and recording frame rate
Version 2.06
- Increased peformance when using with network cameras in application mode
Version 2.05
- Added support to Pixord 10 voice server.
Version 1.10
- Added support to Toshiba's 3.0 firmware
Version 1.09
- Added support to Pixord video server: 1000, 2000 and 4000
Version 1.08
- Added support to Pixord 261 dome camera
Version 1.07
- Supports using number pad to control PTZ camera. There is no need to open
PTZ panel. You can click the number or arrow key on the number pad to adjust
the position. Click + key to zoom in or - key to zoom out.
Version 1.06
- Supports MOBOTIX and Dlink DCS-5300 camera
|