Adding/updating a device To add or change the configurations of a camera or device, click Setup. On the Setup camera tab, select the camera maker. Select your camera model. Enter the IP address or domain name of your camera. Enter the port number of your camera. (Please refer to the manual of your camera. If the url of your camera is http://camera ip:1600, then your port number is 1600 ) If you are connecting to a video server, you can enter the number of the channel. If you are connecting to a video server, you can enter the number of the channel. Enter your username and password. Enter a number in the Frame rate field. (Please note that the actual frame rate depends on the camera and network performance.) To change the settings of a camera, click Setup on the video window. . Generic Motion JPEG camera Most of the network cameras provide single frame access. If you can't find your network camera in the selection box, and you find your camera provides generic JPEG frame access on the documentation, you can select Generic Motion JPEG camera mode. E.g. Axis network cameras provide http://camera_ip_address:port_number/jpg/image.jpg to access the most recent image frame. You can input the IP address and port number, and in JPEG Path field, put in "jpg/image.jpg" (without quotation). You can also use Generic Motion JPEG mode with Webcam Watchdog, Webcam WatchdogX or even with another NetCamCenter. To find the JPEG Path of your Webcam WatchdogX camera, select Setup, Web access tab, you can find the JPEG filename there.