Store       Products       Downloads       Demo       Support       Partnership       Contact Us

Software    Video streaming    Network camera    Remote surveillance   Solutions   Multi-Channel Remote    Surveillance   Multi-Channel Video    Broadcasting   Hardware   Multi-Channel    Video Capture Card   User Guides

Version History of NetCamCenter for multiple cameras Version 2.68f             Date: 2/4/10 Added Sanyo VA-82LAN , VCC-HD2500P, VCC-HD4600P ( JPEG mode ) Added Toshiba IK-WD01A , IK-WB70A Added SONY MJPEG mode for SNC network cameras. Added "MJPEG push" to "Generic Motion JPEG camera" (for cameras with MJPEG server push). Allows you to enter the channel number to select camera stream for Vivotek dual stream cameras. Version 2.68e             Date: 12/16/09 Recordings of different dates are saved in a separate folder named YYYYMMDD under the same video path. Added support to Cisco CIVS-IPC-2500. Version 2.68b             Date: 9/24/09 Supported digital watermark to assure the recordings are authentic. File fingerprint has been removed and replaced by digital watermark. Version 2.68a             Date: 8/31/09 Supported two way audio for Vivotek camera Supported Windows 7 Home Premium, Professional, Ultimate (32-bit and 64-bit) editions (not applied to WCSA440en and WCSA400N.) Version 2.68             Date: 7/14/09 Generates thumbnail images (Available only on NetCamCenter Professional, WCSA400N and WCSA440en.) Added search thumbnails via IE and Firefox.(Available only on NetCamCenter Professional, WCSA400N and WCSA440en.) New Webcam Corp. NVC codec. Added support to the following cameras Linksys WVC210, WVC54GCA Trendnet TV-IP110 / TV-IP110W Added Auto detect for 4XEM Removed "Save as JPEG file". Version 2.67             Date: 5/11/09 Enhanced kiosk mode. Switch between application and kiosk mode without restarting NetCamCenter. Changing camera settings is supported in Kiosk mode. Added camera description and connection status on the top of video in kiosk mode. Generates camera web pages for you to integrate e-map easily Version 2.66             Date: 2/3/09 Added 64 bit USB dongle driver View by Java is no longer supported Version 2.65a             Date: 12/19/08 Added 64 bit USB dongle driver Added Canon VB-C60 The storage limit of NetCamCenter Basic 16 camera version is now 800 GB. Version 2.65             Date: 11/26/08 Added Axis Q7401 Added support to Axis 5.x dual codec firmware Added support to H264 RTSP Version 2.64a             Date: 11/3/08 Added support to the following camera: D-Link DCS-3410 / DCS-3420 DCS-3415 DCS-6110 Panasonic 3.51 firmware for MPEG4 mode (UDP only) Vivotek Auto detect option IP7142 IP7151 IZ7151 PZ7151/7152 SD7151 Version 2.64             Date: 9/11/08 Added NetCamCenter NetViewer. You can select to display the cameras in 2x2, 3x3 or 4x4 mode. Version 2.63b             Date: 7/14/08 Added support to the following camera: D-Link DCS-910/DCS-920 Version 2.63a             Date: 7/1/08 Added support to the following camera: Arecont Vision AV1300M / AV1300DN / AV1300-AI AV2100M / AV2100DN / AV2100-AI AV3100M / AV3100DN / AV-3100-AI AV3130M AV5100M / AV5100DN / AV5100-AI Pixord 4504 / 8504 video server P1000 firmware 2.52R02.02.T Version 2.63             Date: 6/11/08 Support JPEG streaming Added an option to enable or disable generating MD5 fingerprint Added an option to generate JPEG file in htdoc folder Added an Access Camera button to the camera setup tab. Enhanced performance for cameras with Vivotek firmware Added support to the following camera: GANZ ZN-PT304L/ZN-PT304WL ZN-YH305 ZV-S306 ZN-D2024 Vivotek FD7131 Version 2.62a             Date: 3/31/08 Allows changing data folder when first time running NetCamCenter. Version 2.62             Date: 3/10/08 Added flip video horizontally. Added area of interest. Drag and select a rectangle on a video window to zoom in. Supports advanced compression setting for advanced users. Allow recording D-Link 5220 and Vivotek 7xxx cameras with MPEG4 compression. Added support for Axis GPIO. Added reserve only x days of video (NetCamCenter Professional edition only). Added text insertion for system integrators. Version 2.61             Date: 1/4/08 Added authentication to Windows Media streaming Added support to the following cameras: D-Link DCS-5220 ACTi ACM-1430 ACM-1311 ACM-1100 ACM-4100 ACM-4200 Version 2.60             Date: 11/5/07 Supports Axis camera in MPEG4 mode Added support to the following cameras: Pixord P-1401 Generic RTSP MPEG-4 camera Version 2.53c             Date: 10/12/07 Several video post processing are now queued to reduce peak system usage. Version 2.53a             Date: 9/14/07 Improved performance with Vivotek and D-Link cameras. Added connection speed information with Vivotek and D-Link cameras. Version 2.53             Date: 8/23/07 Added support to the following cameras: Canon VB-C10/VB-C10R LevelOne FCS-1010, WCS-2010 FCS-1040, WCS-2040 FCS-1070, WCS-2070 Panasonic BB-HCM511, BB-HCM531, BB-HCM580, BB-HCM581 BL-C111, BL-C131 Vivotek FD6111V, FD6121V, FD6112V/, FD6122V IP7131, IP7132, IP7135, IP7137 SD6112V, 6122V VS3100P VS7100 IP7138, IP7139 PT7135, PT3137 Version 2.52a             Date: 6/4/07 If you are using 2.52 with NVC2 encoding, you only need to download and install NVC2 2.01 decoder to view the video on Windows Vista. Version 2.52             Date: 5/22/07 Improved video playback Improved kiosk mode and dual monitor support Version 2.51             Date: 4/9/07 Added support to Toshiba IK-WB02A Version 2.51             Date: 4/9/07 Added support to Toshiba IK-WB02A Version 2.50a             Date: 3/14/07 Added support to Canon VB-C50Fi Added support to Toshiba IK-WB15A, and IK-WB21A Added support to search video captured by motion detection Updated ActiveX control for remote viewing Version 2.50             Date: 1/30/07 Default video and htdoc folder is now under Shared Documents Added Axis 4.x firmware with PTZ (JPEG mode) for Axis cameras running with Axis 4.x firmware . Added support to change password for User Manager. Webcam Corp NVC2 codec released. Video recorded with NVC2 has a file extension of .asf. Attempts to warn and retry when there's a file failure. (e.g. when connection to network file storage is lost or crashed) Version 2.44b             Date: 11/13/06 Version 2.44a             Date: 11/6/06 Supported TV-IP301 (JPEG mode only) Version 2.44             Date: 10/17/06 Added support to control Canon PTZ remotely Added email notification when connection to the camera is lost Updated PTZ control panel Webcam Corp WVC1 codec is renamed to NVC1 codec. Version 2.43             Date: 9/7/06 Supported IQinVision IQeye501 Fixed GPIO alarm actions Version 2.42             Date: 7/24/06 Version 2.41             Date: 6/8/06 Supported audio recording for the following devices Panasonic BB_HCM311A BB_HCM381 BB_HCM331 BB_HCS301A Added option to Disable JPEG optimization for Intel CPU Added support to the following cameras. 4XEM IPCAMWPTZ/IPCAMWLPTZ IPCAMW40 IPCAMW30 ELMO SN2230IP Linksys WVC200 SONY SNC-RZ50N (JPEG mode) Version 2.40             Date: 4/18/06 Supported prealarm recording Supported the input and output controls to the following devices D-Link DCS-3220, DCS-3220G DCS-5300, DCS-5300G, DCS-5300W DCS-6620, DCS6620G Panasonic KX-HCM2XX KX-HCM311A KX-HCM331 Pixord P4000 Vivotek IP211x, IP212x IP311x, IP312x, IP3132, IP3133 IP61x2, IP61x4 PT31xx PZ61xx VS2101,VS2402, VS2403 VS3102 Version 2.30b             Date: 2/21/06 Disables JPEG optimization for more cameras that output not properly encoded JPEG Added support to TrendNet's TV-IP100 Version 2.30a             Date: 2/7/06 New feature: adjustable motion detection speed Disables JPEG optimization for cameras that output not properly encoded JPEG Version 2.30             Date: 1/18/06 Improved motion detection. Also provides an option to mark the motion detected areas. Allow non-transparent text background color. Version 2.20             Date: 12/23/05 Supports uploading images to FTP server by seconds Supports the following compression codecs Windows Media Video 7 Windows Media Video 8 Webcam Corp WVC1 Added support to the following cameras. Axis 207/207W/210/211/221 (JPEG mode) Axis 210A/211A (JPEG mode) Panasonic BB-HCM331, BB-HCM381 Version 2.15             Date: 11/18/05 Added support to the following cameras. SONY SNC-M1/M1W (JPEG mode) SNC-M3/M3W (JPEG mode) PTZ cruise Version 2.14c             Date: 10/17/05 Improved frame rate for Canon network camera. Fixed black screen after running screen saver. Version 2.14 Added support to video rendering with DirectX. Added support to record audio with the following cameras. DCS-6620/DCS-6620G IP6112, IP6122, IP6114, IP6124, PZ61xx Supported deblocking This option is available for certain cameras. Deblocking provides better video quality but consumes more CPU resources. Version 2.13 Added support to Axis 210, 211, 211A, 231D, 232D Added support to Canon VB-50i, VC-50i, VB-50iR, VC-50iR Added support to D-Link DCS-6620, DCS-6620G Added support to Vivotek IP6112, IP6122, IP6114, IP6124, PZ61xx Version 2.12 Control network PTZ camera through the built-in web server. Setup multiple usernames and passwords to control access to specific camera. (NetCamCenter Professional only.) Support recording audio and video with the following devices. D-Link 5300, D-Link 2100 series Vivotek IP31xx camera Vivotek VS31xx video server Control network PTZ camera through the built-in web server. Enhanced video quality when panning the D-Link 5300 camera. Version 2.08 Added support to StarDot video server and camera Fixed timestamp on captions Version 2.07 Added support to Axis 241Q, 241S Added support to Panasonic BL-C30, KX-HCM3x0 Enables you to enter compression rate manually Enables you to setup display and recording frame rate Version 2.06 Increased performance when using with network cameras in application mode Version 2.05 Added support to Pixord 10 voice server. Version 2.03a Improved error recovery Version 2.03 Fixed connection error for Axis 205 Version 2.0 Supports Windows Media streaming Added hiding particular camera in kiosk mode Added more methods for display mode: 1x1, 2x2, 3x3, 4x3, 4x4, 5x5, 6x6, 7x7, 8x8, 9x9 or 10x10 Supports "Rotate camera image 180 degree" New video engine: Up to 400% faster compare to previous versions. Fixed video file maintenance. Version 1.10 build #3 Support firmware 3.0 of Toshiba's camera Version 1.10 Supports Kiosk mode. Allowing you to display camera without caption and tool bar. Fixed connection error for Axis 205 Improved frame rate Added support to Pixord 241 Version 1.09 Added support to Pixord video server 1000, 2000 and 4000 Version 1.08 Added support to Pixord 261 dome camera Version 1.07 Supports using number pad to control PTZ camera. There is no need to open PTZ dialog. You can click the number or arrow key on the number pad to adjust the position. Click + key to zoom in or - key to zoom out. Version 1.06 Supports MOBOTIX and Dlink DCS-5300 camera Copyright ©2010 Webcam Corp. All Rights Reserved. All trademarks are owned by respective company.