Webcam Corp.
  Store       Products       Downloads       Demo       Support       Partnership       Contact Us
  Software
   Video streaming
   Network camera
   Remote surveillance

  Solutions
  Multi-Channel Remote
   Surveillance
  Multi-Channel Video
   Broadcasting

  Hardware
  Multi-Channel
   Video Capture Card
  User Guides



    


  
Version History of NetCamCenter Single Camera Edition


Version 2.57d             Date: 2/4/10
  • Added Sanyo VA-82LAN , VCC-HD2500P, VCC-HD4600P ( JPEG mode )
  • Added Toshiba IK-WD01A , IK-WB70A
  • Added SONY MJPEG mode for SNC network cameras.
  • Added "MJPEG push" to "Generic Motion JPEG camera" (for cameras with MJPEG server push).
  • Allows you to enter the channel number to select camera stream for Vivotek dual stream cameras.

Version 2.57c             Date: 12/16/09
  • Recordings of different dates are saved in a separate folder named YYYYMMDD under the same video path.
  • Added support to Cisco CIVS-IPC-2500.

Version 2.57b             Date: 9/24/09
  • Supported digital watermark to assure the recordings are authentic. File fingerprint has been removed and replaced by digital watermark.
  • Supported two way audio for Vivotek camera
  • Supported Windows 7 (32-bit and 64-bit) editions

Version 2.57a             Date: 8/31/09
  • Supported two way audio for Vivotek camera
  • Supported Windows 7 Home Premium, Professional, Ultimate (32-bit and 64-bit) editions

Version 2.57             Date: 7/15/09
  • New Webcam Corp. NVC codec.


  • Added support to the following cameras
    • Linksys WVC210, WVC54GCA
    • Trendnet TV-IP110 / TV-IP110W
    • Added Auto detect for 4XEM

  • Removed "Save as JPEG file".

Version 2.56             Date: 2/9/09
  • A hyperlink to JPEG snapshot will be added if generate static JPEG is enabled.
  • Added an HTML page - MJPEG streaming without ActiveX (for browsers that support server push but not ActiveX).

  • View by Java is no longer supported

Version 2.55a             Date: 12/19/08
  • Added Canon VB-C60

Version 2.55             Date: 11/26/08
  • Added Axis Q7401
  • Added support to Axis 5.x dual codec firmware
  • Added support to H.264 RTSP

Version 2.54             Date: 11/3/08
  • Added support to the following camera:


    • D-Link

    • DCS-3410 / DCS-3420
    • DCS-3415
    • DCS-6110

    Panasonic

    • 3.51 firmware for MPEG4 mode (UDP only)

    Vivotek

    • Auto detect option
    • IP7142
    • IP7151
    • IZ7151
    • PZ7151/7152
    • SD7151


Version 2.53             Date: 7/1/08
  • Support JPEG streaming
  • Added an option to enable or disable generating MD5 fingerprint
  • Added an option to generate JPEG file in htdoc folder
  • Added support to the following camera:


    • Arecont Vision

    • AV1300M / AV1300DN / AV1300-AI
    • AV2100M / AV2100DN / AV2100-AI
    • AV3100M / AV3100DN / AV-3100-AI
    • AV3130M
    • AV5100M / AV5100DN / AV5100-AI

    D-Link

    • DCS-910 / DCS-920

    Pixord

    • 4504 / 8504 video server
    • P1000 firmware 2.52R02.02.T

    Vivotek

    • FD7131



Version 2.52             Date: 3/7/08

  • Added flip video horizontally.
  • Added area of interest. Drag and select a rectangle on a video window to zoom in.
  • Supports advanced compression setting for advanced users.
  • Allow recording D-Link 5220 and Vivotek 7xxx cameras with MPEG4 compression.
  • Added support for Axis GPIO.


Version 2.51             Date: 1/3/08
  • Added authentication to Windows Media streaming
  • Added support to the following cameras:

    D-Link

    • DCS-5220


    ACTi

    • ACM-1430
    • ACM-1311
    • ACM-1100

    • ACM-4100

    • ACM-4200



Version 2.50             Date: 11/8/07
  • Supports Axis camera in MPEG4 mode

  • Added support to the following cameras:

    • Pixord P-1401

    • Generic RTSP MPEG-4 camera

Version 2.43a             Date: 9/14/07
  • Improved performance with Vivotek and D-Link cameras.


Version 2.43             Date: 8/23/07
  • Added support to the following cameras:

      Canon
    • VB-C10/VB-C10R


      • LevelOne
    • FCS-1010, WCS-2010
    • FCS-1040, WCS-2040
    • FCS-1070, WCS-2070


      Panasonic
    • BB-HCM511, BB-HCM531, BB-HCM580, BB-HCM581
    • BL-C111, BL-C131

      Vivotek
    • FD6111V, FD6121V, FD6112V/, FD6122V
    • IP7131, IP7132, IP7135, IP7137
    • SD6112V, 6122V
    • VS3100P
    • VS7100
    • IP7138, IP7139
    • PT7135, PT3137

Version 2.42a             Date: 6/4/07
  • If you are using 2.42 with NVC2 encoding, you only need to download and install NVC2 2.01 decoder to view the video on Windows Vista.

Version 2.42             Date: 5/16/07
  • Improved video playback

Version 2.41             Date: 4/3/07
  • Supports Windows Server 2003
  • Added support to Toshiba IK-WB02A

Version 2.40a             Date: 3/13/07
  • Added support to Canon VB-C50Fi
  • Added support to Toshiba IK-WB15A, and IK-WB21A
  • Added support to search video captured by motion detection
  • Updated ActiveX control for remote viewing

Version 2.40             Date: 1/30/07
  • Default video and htdoc folder is now under Shared Documents
  • Added support to Axis 212 (JPEG mode).
  • Webcam Corp NVC2 codec released. File extension is asf now.
  • Attempts to warn and retry when there's a file failure. (e.g. when connection to network file storage is lost or crashed)

Version 2.32e             Date: 11/6/06
  • Supported TV-IP301 (JPEG mode only)

Version 2.32d             Date: 10/17/06
  • Added support to control Canon PTZ remotely
  • Added email notification when connection to the camera is lost
  • Updated PTZ control panel
  • Webcam Corp WVC1 codec is renamed to NVC1 codec.

Version 2.32c             Date: 9/26/06

Version 2.32b             Date: 9/7/06
  • Supported IQinVision IQeye501
  • Fixed GPIO alarm actions

Version 2.32             Date: 6/14/06
  • Supported audio recording for the following devices


    • Panasonic
    • BB_HCM311A
    • BB_HCM381
    • BB_HCM331
    • BB_HCS301A

  • Added option to Disable JPEG optimization for Intel CPU
  • Added support to the following cameras.

      4XEM
    • IPCAMWPTZ/IPCAMWLPTZ
    • IPCAMW40
    • IPCAMW30


      • ELMO
    • SN2230IP


      • Linksys
    • WVC200


      • SONY
    • SNC-RZ50N (MJPEG mode)




Version 2.30             Date: 4/18/06
  • Supported prealarm recording
  • Supported the input and output controls to the following devices


      • D-Link
    • DCS-3220, DCS-3220G
    • DCS-5300, DCS-5300G, DCS-5300W
    • DCS-6620, DCS6620G


      • Panasonic
    • KX-HCM2XX
    • KX-HCM311A
    • KX-HCM331


      • Pixord
    • P4000


      • Vivotek
    • IP211x, IP212x
    • IP311x, IP312x, IP3132, IP3133
    • IP61x2, IP61x4
    • PT31xx
    • PZ61xx
    • VS2101,VS2402, VS2403
    • VS3102


Version 2.20b             Date: 2/21/06
  • Disables JPEG optimization for more cameras that output not properly encoded JPEG
  • Added support to TrendNet's TV-IP100


Version 2.20a             Date: 2/7/06
  • New feature: adjustable motion detection speed
  • Added support to TrendNet TV-IP100


Version 2.20             Date: 1/18/06
  • Improved motion detection. Also provides an option to mark the motion detected areas.
  • Allow non-transparent text background color.


Version 2.10             Date: 12/19/05
  • Supports uploading images to FTP server by seconds
  • Supports the following compression codecs
    • Windows Media Video 7
    • Windows Media Video 8
    • Webcam Corp WVC1


  • Added support to the following cameras.

    • Axis 207/207W/210/211/221 (JPEG mode)
    • Axis 210A/211A (JPEG mode)
    • Panasonic BB-HCM331, BB-HCM381

Version 2.07             Date: 11/17/05
  • Added support to the following cameras.

    • SONY SNC-M1/M1W (JPEG mode)
    • SNC-M3/M3W (JPEG mode)

  • PTZ cruise


Version 2.06a
  • Fixed black screen on a camera window after running screen saver

  • Fixed low frame rate for Canon network camera

Version 2.06
  • Added support to video rendering with DirectX.

  • Added support to record audio with the following cameras.

    • DCS-6620/DCS-6620G
    • IP6112, IP6122, IP6114, IP6124, PZ61xx



Version 2.05
  • Added support to Axis 210, 211, 211A, 231D, 232D

  • Added support to Canon VB-50i, VC-50i, VB-50iR, VC-50iR

  • Added support to D-Link DCS-6620, DCS-6620G

  • Added support to Vivotek IP6112, IP6122, IP6114, IP6124, PZ61xx


Version 2.04
  • Support recording audio and video with the following devices.

    • D-Link 5300, D-Link 2100 series
    • Vivotek IP31xx camera
    • Vivotek VS31xx video server


  • Control network PTZ camera through the built-in web server.


  • Enhanced video quality when panning the D-Link 5300 camera.


Version 2.03a
  • Added support to StarDot camera and video server


Version 2.03
  • Added support to Axis 241Q, 241S
  • Added support to Panasonic BL-C30, KX-HCM3x0
  • Enables you to enter compression rate manually
  • Enables you to setup display and recording frame rate
Version 2.01a
  • Allowing you to change the image size when connecting to the camera.
Version 2.01
  • Added support to Pixord 10 voice server.
Version 2.0
  • Added a web server.
  • Support Windows Media Streaming.
Version 1.12a
  • Improved error recovery.
Version 1.12
  • Fixed connection error for Axis 205.
Version 1.11
  • Added image enhancement. You can rotate the image 180 degree.
  • Support FTP uploading image
Version 1.10
  • Support firmware 3.0 of Toshiba's camera
  • Fixed connection error for Axis 205
  • Improved frame rate
  • Added support to Pixord 241
Version 1.09
  • Added support to Pixord video server 1000, 2000 and 4000
Version 1.08
  • Added support to Pixord 261 dome camera
Version 1.07
  • Supports using number pad to control PTZ camera. There is no need to open PTZ dialog. You can click the number or arrow key on the number pad to adjust the position. Click + key to zoom in or - key to zoom out.

Version 1.06
  • Supports MOBOTIX and Dlink DCS-5300 camera




Copyright ©2010 Webcam Corp. All rights reserved.
All trademarks are owned by respective company.