|
|
Auto Iris Lens Instruction Manual
- Mounting the Lens
Mount the lens by turning it clockwise on the lens mount of the camera.
- Connect the 4 pin connector
Plug the connector provided on the lens into the connector on the rear of the camera marked AUTO IRIS.
You may now power up the camera now. It is recommended that you
remove power from the camera before connecting or disconnecting the lens.
- Adjust the focus
Loosen the screw on the flange-back adjusting ring if there is a screw on the lens. Turn the flange-back adjusting ring to the desired position.
Tighten the screw on the flange-back adjusting ring.
|
